The best equipment for pros and enthusiasts alike
Professions
JALPURE SAS ESD S3 Low Safety Shoes - JALLATTE
With its 100% composite materials, lighter than steel and non-conductive to heat and cold, the JALPURE safety shoe meets S3 standards. It has an upper made of PUTEK® PLUS which is highly resistant to abrasion, as well as water-repellent and breathable. A TPU insert is integrated into the lacing for good heel support, better foot alignment in the shoe, thus avoiding the risk of sprains.
Its J-ENERGY sole in bi-component PU / and E-TPU insert (Expanded Thermoplastic PolyUrethane) called Infinergy® from BASF returns more than 70% of the energy accumulated while walking to reduce fatigue and the risks of MSDs (musculoskeletal disorders) of the lower limbs.
FEATURES:
Standard: EN ISO 20345:2011
Upper: PUTEK® PLUS highly resistant to abrasion, water-repellent and breathable. TPU reinforcement system at the back and sides
Lining: in 3D mesh, with alveolar structure, improves peripheral ventilation of the foot and dries quickly
Toecap: PREM-Alu in aluminum 200 J
Insole: Memory + GEL in polyurethane and temperature-sensitive memory foam to cushion pressure points and absorb heel shocks. Anatomical and perforated.
Anti-perforation: Flextane™ HP by Jallatte® Zero millimeter
Sole: J-ENERGY with Infinergy® insert from BASF
Non-slip
The soles of this shoe have been tested and approved as non-slip, which means that this shoe adheres particularly well to surfaces to prevent any potential falls of the wearer. Depending on the shoe's standard, the grip may vary, please refer to the description.
Oil and fuel resistance
According to the EN ISO 20345 standard, all safety shoes above the SB class are equipped with a acid-resistant sole, oil-resistant and fuel-resistant. Without this, shoes in contact with hydrocarbons can crack or lose their flexibility.
Water resistant
This product is water resistant but not waterproof. It resists splashes or light rain but will not withstand complete immersion or prolonged exposure to rain.
Anti-perforation sole
Safety shoes compliant with EN ISO 20345 S1P, S3, and S5 standards have an anti-perforation sole such that a 4.5 mm diameter nail cannot penetrate the shoe at a pressure force of 1100 Newtons, which is equivalent to an 80 kg man walking.
Shock absorption
All shoes compliant with EN ISO 20345 and 20347 standards above class 1 are equipped with a shock-absorbing heel. The minimum force set is 20 Joules, which is equivalent to an 80 kg man falling from 25 cm. This is sufficient to greatly reduce the risks of fracture, sprain or injury and also to minimize fatigue during the day.
Antistatic
Antistatic shoes provide a necessary level of insulation to protect the wearer against electricity, thus preventing static shock, discharge, or spark. To be certified EN ISO 20345 or EN ISO 20347, safety or work shoes must meet these electrical insulation criteria.
Be the first to ask a question about this product!
There are no images for this product yet
Related products
-35% €89.64 Tax included
€137.90 Tax included
€74.70 Excl. tax
